Setup Zigbee

To connect Shade Control to a zigbee hub, first you need to make the device connectable. 

Press the stop button for at least 3 seconds until the blue LED blinks.

Check Zigbee connection

To check if the device has a Zigbee connection, press the stop button 1 time. A blue LED indicates it has a Zigbee connection. A red LED indicates no zigbee connection.

Remove from Zigbee network

To remove Shade Control from the Zigbee network, press the stop button 3 times within 2 seconds. If the removal is succesful, it will indicate a blue and red led with alternate blinking.